Understanding NHL 2, NHL 3.5 and NHL 5 for estimates

Why a lime grade does not determine repointing suitability, finished mortar strength or litres per bag.

Pointing Calculator • • 2 min read

NHL identifies natural hydraulic lime. Grade labels such as NHL 2, NHL 3.5 and NHL 5 relate to the binder’s standardized strength classification. They are not direct instructions to use a particular product on every soft brick, exposed wall or chimney.

Binder grade and complete mortar differ

A finished mortar also depends on aggregate, proportions, water, workmanship and curing. A bag of NHL binder normally needs other constituents to make mortar; its mass cannot be entered as though it were a bag of complete premixed pointing mortar.

Ask the supplier whether the package is binder or complete mortar and obtain the actual technical data sheet. Review suitability against the wall and repair specification. Avoid choosing a higher number simply to maximize strength.

Why the calculator needs yield

The grade label alone cannot supply litres per pack. For an illustrative requirement of 60 L, a complete product yielding 12 L per pack requires five packs. At 15 L per pack it requires four. Both are arithmetic examples, independent of the NHL grade.

For a site mix, the separate loose volumes of dry ingredients do not automatically add up to the final compacted mortar volume. Keep the estimate in litres until the mix design and a reliable batch yield have been established.

Record the purchasing basis

Keep the complete product name, supplier data-sheet date, pack mass, mixed yield and preparation/curing instructions with your estimate. The Lime Green Strong Mortar data sheet illustrates the sort of product-specific information to check; it is not a specification for every project.

Use the calculator to change the example material assumptions after selecting the actual product. The methodology explains how entered yield controls pack quantities.

Ready to estimate your repointing project?

Estimate joint volume, product packs and a stated waste allowance from measured inputs.

Calculator